Máy hàn laser cầm tay AL-ARM 450F

Hệ thống máy hàn AL-ARM cho phép hàn chế tạo và sửa chữa rất nhanh chóng và linh hoạt, không mất nhiều thời gian chuẩn bị.

Ứng dụng: hàn chế tạo kim loại tấm, sửa chữa thân vỏ ô tô, thiết bị công nghiệp nặng

The AL-ARM is different:

With this welding laser, the welding process is monitored through 3D visualization instead of customary microscope attachments. This is realized via (pass-through) 3D laser protection goggles, which allow you to keep an eye on the environment and the welding task at the same time. The welding area is augmented and the process-relevant data, such as the cross-hairs, are displayed directly.

This laser system has no resonator, but instead a handset with automated wire feeding for wire thicknesses up to 0.6 mm. The wire is fed automatically. The handset weighs only 1.5 kg and is connected to the supply unit via a 3.5 m long energy chain.

It is easy to handle and very flexible during operation. The welding seam width can be variably adjusted during the welding process.

A lot of emphasis was placed on safety: Integrated workpiece detection ensures that welding is only allowed when the handset touches the workpiece. This prevents uncontrolled laser radiation emissions. The safety concept verified by TÜV for compliance with the high safety requirements for performance level d is included.

Technical data:

Laser type / wavelength Fiber laser, 1070 nm
Average power 450 W
CW output 450 W
Peak pulse power 4500 W
Pulse energy 45 J
Pulse duration 0.2 ms – CW
Pulse frequency Single pulse – 100 Hz
Electrical connection 3-phase, 16 A
Operating modes Pulsed / CW
Welding spot Ø 0.3 – 4 mm
Focal distance 120 mm
Pulse shaping Adjustability of power curve within a laser pulse
Energy chain length 3.5 m